Filter
Top Products
Installing the Antenna
Mounting the Antenna
4-8 Outdoor Antenna Installation Guide
Figure 4-2 Mounting the 14-dBi Antenna to a Wall
Mounting the Omni-directional Antenna 4
It is recommended that you mount the RoamAbout 7-dBi Omni-
Directional antenna to a mast. Proceed as follows:
1. Verify that you have the following items:
• The RoamAbout 7-dBi Omni-Directional Antenna
• A metal mounting bracket (included)
• Two hose-clamps (included)
• Nut and lockwasher (included)
• A standard screwdriver or small wrench to tighten the nut
on each hose-clamp
CAUTION
!
Always use flatwashers between the mounting screws/nuts
and the plastic antenna mounting base. Avoid overtightening
the mounting screws/nuts to prevent damage to the antenna
mounting base.
Backing Plate
Antenna Mounting Base
Flatwasher
Always place Flatwashers between nuts or
bolts and Antenna Mounting Base!
Direction of Maximum Signal
Intermediate Plate (not included). Required when
mounting antenna on a rough surface.