Filter
Top Products
Installing the Antenna
Mounting the Antenna
4-6 Outdoor Antenna Installation Guide
• Four flatwashers and four nuts (included with antenna)
• A socket wrench to tighten the nuts
2. Note the arrows on the plastic antenna mounting base.
3. Install the antenna with the arrows pointing up.
4. Attach the antenna mounting base and metal backing plate to
the mast using U-bolts, clamps, flat washers and nuts as
shown in Figure 4-1.
5. Proceed to
Connecting the Antenna Cable
on page 4-10.
Figure 4-1 Mounting the 14-dBi Antenna to a Mast
CAUTION
!
Always place flatwashers between nuts and the plastic
antenna mounting base. Avoid overtightening the nuts to
prevent damage to the plastic antenna mounting base.
Side View
Top View
Clamp
Backing Plate
Antenna Mounting Base
Flatwasher
Always place flatwashers between
nuts and the Antenna Mounting Base.
Direction of Maximum Signal