Filter
Top Products
The Antenna Cabling System
RoamAbout Cable Assembly
C-4 Outdoor Antenna Installation Guide
RoamAbout Cable Assembly 3
The RoamAbout Cable Assembly is a proprietary cable used to
connect the RoamAbout PC Card to a RoamAbout outdoor
antenna system. This cable is included in the RoamAbout Outdoor
Kit.
One end of the cable has a proprietary connector which is
connected to the RoamAbout PC Card.
The N-Type connector at the opposite end of the cable matches
the polarity of the N-connectors of the other components that are
part of your outdoor antenna cabling system, subject to the country
where the RoamAbout Outdoor Kit and/or Cable Assembly was
purchased.
Table C-2 Cable Assembly Specifications
Mechanical
Length 50 cm (19.5 in)
Connectors
1
1 See
Selecting the Correct Connector Type
on page C-1.
• FCC Countries Reverse Polarity-N (Female)
• ETSI Countries Standard-N (Male)
• France Standard-N (Male)
• Japan Standard-N (Male)
Operating Temperature -40°C to +85°C (-40°F to +185°F)
Electrical
Frequency Range 800-2500 MHz
Insertion Loss 0.9 dB