Filter
Top Products
Set Remote Control
72
9. Set Remote Control
The remote with the DP-SI can control other brands. If you wish to
control your TV, please press the
TV
button. After this, the red-
backlight of the
TV
button will flash when you press the buttons to
indicate that the remote control works for your TV.
There are two ways to program the remote control to work with your TV,
automatic code search or manual set.
1. Automatic Code Search
Please turn on your TV then press and hold the
TV
button until the red-
backlight turns on. Please point the remote control at your TV and click
the
UP
button. After the red-backlight of the
TV
button blinks, please
wait at least 3 seconds to check your TV turns off or not. If your TV
turns off automatically, your remote control is ready to use for your TV.
If your TV does not turns off, please repeat clicking the
UP
button until
your TV turns off. Once your TV turns off after you click the
UP
button,
please press the
OK
button. The
TV
button blinks three times to
indicate that the remote control is set.
2. Manual Set
You can set your remote control with 3-digit code manually. Please look
at the following table and find the brand of your TV.
Turn on your TV then press and hold the
TV
button until the red-
backlight turns on. Please point the remote control at your TV and enter
the 3-digit code with the
NUMERIC
buttons. Wait until the red-
backlight blanks three times. If your TV turns off automatically, your
remote control is ready to use for your TV. If your TV does not turns off,
press the
TV
button and enter another code from the table under that
brand.
FUJITSU 208 223 224 218 253
261 286 307 325 329
410 422 423
HITACHI 206 207 208 215 218
229 231 232 236 238
240 244 253 256 286
287 292 298 299 300
301 304 305 306 307
309 3123 314 315 316
317 325 358 367 381
382 383 384 399 405
406 407 410 411