Filter
Top Products
Advanced Setup
66
z
Time Setting Menu: If you set this, you have to enter the PIN number
when you change the time and date setting.
z
Network Configuration Menu: If you set this, you have to enter the
PIN number when you change the network configuration.
z
Service Scan Menu: If you set this, you have to enter the PIN number
to scan service.
z
Factory Setting Menu: If you set this, you have to enter the PIN
number to set your DP-S1 as factory-default setting.
To change the configuration, press the
OK
button to get a pop-up menu
to change the configuration. Please select with the
UP/DOWN
buttons
and press the
OK
button to select. If you do not want to change, press
the
EXIT
button.