Filter
Top Products
STB & PVR Function
38
3-2. Instant Recording
1) Start Recording
You can record the current service and store it in the HDD instantly by
pressing the
REC
button. The following picture shows options you can
choose when you record a program.
z
Duration: You can change the duration of recording with the
LEFT
and
RIGHT
buttons. The default is 120 minutes.
z
Starting Point: You can select the starting point of recording with the
LEFT/RIGHT
buttons when the time-shift function is enabled. If the
time-shift function is disabled, you can only record from the current
time.
1. Live: Start recording from the time when you press the
REC
button.
2. Current Program: Record only the current program even if there
is a previous program stored in the time-shift buffer.
3. All: Record all the programs in the time-shift buffer.
z
File Lock: You can lock the recording file if you want. The
LEFT/
RIGHT
buttons will change this option.
z
File Name: The recording will be stored on the HDD as a file with the
name of the current program but you can change the file name if you
want. If you press the
OK
button, an on-screen keyboard will pop up
and you can enter a new file name.
After setting all options, please press the
REC
button on the remote
control or choose “Accept” button on the screen to start recording. If
you want to cancel the recording, press the
EXIT
button on the remote
control or “Cancel” button on the screen.