Arkon CDA-118M CD Player User Manual


 
43-EN
MiniTuner missing/disconnected or no communication between
the unit and XM Radio.
-Check the XM Tuner.
The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
The Receiver is updating the SIRIUS channel line up. During
update, audio will be muted until update is completed.
- Wait until the channel update is completed. After completion,
the unit automatically re-tune to previous channel.
Radio’s firmware is being updated. During firmware update,
audio will be muted until update is completed.
- Wait until the update is completed. After completion,
automatically re-tune to previous channel.
The subscribed program is being updated. During update, audio
will be muted until update is completed.
- Wait until the update is completed. After completion, follow
the indication “SUB UPDT” to press any key on the unit to
continue, the unit re-tune to previous channel.
XM or SIRIUS signal is too weak at the current location.
- Wait until the boat reaches a location with a stronger signal.
Radio is acquiring audio or program information.
- Wait until the radio has received the information.
The channel currently selected has stopped broadcasting.
- Select another channel.
The user has selected a channel number that does not exist.
- The unit will revert back to the previously selected channel.
The user has selected a channel number that does authorized.
- The unit will revert to the previous selected channel or to
channel 1 automatically.
Indication for SAT Receiver Mode
(SIRIUS mode)
(SIRIUS mode)
(Blink) (SIRIUS mode)
(SIRIUS mode)
(XM mode)
(XM mode)
(XM mode)
(SIRIUS mode)
(XM mode)
(XM mode)
(XM mode)