Arkon CDA-118M CD Player User Manual


 
33-EN
Adjusting Sound Setting in Manual Mode
You can change these sound settings to create your own preference
when the MultEQ mode is set to MultEQ off (Manual Mode).
However, subwoofer in the subwoofer system can be set to ON/OFF
regardless of whether the MultEQ setting is ON or OFF.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Rotary encoder to select AUDIO, and then
press
/ENTER.
BT*
1
AUDIO GENERAL DISPLAY IPOD
XM/SIRIUS*
2
HD RADIO*
3
BT
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*
2
Only when SAT Radio receiver is connected.
*
3
Only when HD Radio tuner module is connected.
3
Turn the Rotary encoder to select the desired item,
and then press
/ENTER.
AUX ZONE SELECT*
4
MUTE LEVEL
USER PRESET
MX FR-EQ SOUND FIELD
*
5
SUBW
SUBW SYS
*
6
SUBW PHASE
*
6
SUBW CHANNEL
*
6
TW
*
7
EQ MODE FILTER TCR MX LEVEL
*
8
AUX ZONE SELECT
*
4
(e.g. Select SUBW)
*
4
Displayed only when AUX ZONE is set to ON.
*
5
In step 3, three sound adjustment items (PARAMETRIC EQ/
GRAPHIC EQ, TIME CORRECTION, X-OVER) can be selected in
Sound Field Adjustment mode, turn the Rotary encoder to select the
desired item, and then press
/ENTER to continue to step 4.
*
6
These functions are inoperable when Subwoofer is set to OFF.
*
7
This function can be operable only when PXA-H100 (sold
separately) is connected and 2.2ch (3WAY) mode is set. For details,
refer to the Owner’s Manual of PXA-H100.
*
8
This function is inoperable when MX is set to OFF.
4
Turn the Rotary encoder to change the setting,
and then press
/ENTER.
(e.g. Select SUBW ON or SUBW OFF)
5
Press and hold for at least 2 seconds to return to
normal mode.
Media Xpander, Factory’s EQ, Parametric EQ/Graphic EQ
Adjustment, EQ Mode and MX Level Adjustment are inoperable
when DEFEAT is set to ON.
Pressing returns to the previous Sound menu mode.
If no operation is performed for 60 seconds, Sound menu mode is
canceled.
If IMPRINT audio processor is connected, you can make more
detailed settings for the audio setting. For details, refer to
“IMPRINT
Operation (Optional)” (page 32).
Storing the Audio Adjustment Level
You can store up to 3 adjusted/set contents on this unit.
All of the following adjusted/set items are stored in a preset
memory.
1
Turn the Rotary encoder to select a preset number,
and press and hold
/ENTER for at least 2
seconds.
2
Turn the Rotary encoder to select PROTECT YES/
NO, and then press
/ENTER to store the adjusted
contents.
PROTECT YES (Initial setting)
PROTECT NO
If YES is selected, the adjusted contents are protected and stored into
the preset numbers. When you want to store the parameter into a
protected preset number, “REPLACE NO/YES” can be selected.
If PROTECT NO is selected, the preset is stored.
While performing this operation, all adjusted contents of Parametric
EQ/Graphic EQ, Time Correction and X-Over will be stored in the
preset number.
The stored contents are not deleted even when resetting the unit or
disconnecting the battery.
Recalling the Audio Adjustment Level
You can recall the contents stored in “Storing the Audio Adjustment
Level” (page 33).
1
Turn the Rotary encoder to select a preset number,
and press
/ENTER.
Adjusted/set contents of the selected number are recalled.
When the Media Xpander is on, you can adjust the Media Xpander level
(refer to
page 36).
OFF (Initial setting) ON
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
FLAT POPS ROCK NEWS JAZZ&BLUES
ELECTRICAL DANCE HIPHOP&RAP
EASY LISTENING COUNTRY CLASSICAL USER1
USER2 USER3 USER4 USER5 USER6
By selecting User’s 1 to 6, you can recall the stored preset number in
“Adjusting the Graphic Equalizer Curve” (page 34) or “Adjusting
the Parametric Equalizer Curve” (page 34).
Use steps 1 to 5 to select one of the Sound menu
modes to modify. See the applicable section below for
details about the selected item.
USER PRESET
Items to be adjusted/set Reference page
EQ ADJ (Parametric EQ/Graphic EQ) page 34~page 34
TCR page 34
X-OVER page 35
Turning Media Xpander ON/OFF
Equalizer Presets (Factory’s EQ) (FR-EQ)