Filter
Top Products
23-EN
Use the SETUP menu to flexibly customize the unit to suit your own
preferences and usage. Choose settings from GENERAL, DISPLAY,
etc., to make the desired changes.
1
Press and hold FUNC./SETUP for at least 2
seconds to activate the SETUP selection mode.
2
Turn the Rotary encoder to select the desired item,
and then press
/ ENTER.
BT*
1
AUDIO GENERAL DISPLAY IPOD
XM/SIRIUS*
2
HD RADIO*
3
BT*
1
*
1
Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*
2
Only when SAT Radio receiver is connected.
*
3
Only when HD Radio tuner module is connected.
3
Turn the Rotary encoder to select a setting item,
and then press
/ ENTER.
(e.g. Select POWER IC)
BT:
BT IN
AUDIO*
4
:
AUX ZONE SELECT
*
5
MUTE LEVEL
USER PRESET
*
6
MX
*
6
SUBW
*
6
MX LEVEL
*
7
AUX ZONE SELECT
*
5
GENERAL:
TUNER PLAY MODE BEEP INT MUTE
*
8
AUX+
AUX+ NAME
*
9
AUX ZONE AUX ZONE NAME
*
9
AUX
AUX NAME
*
9
CHANGER NAME
DIGITAL AUX D-AUX NAME
*
10
AUX IN GAIN
*
11
POWER IC DEMO TUNER
DISPLAY:
VOL DISP
ILLUMINATION
DIMMER
DIMMER LEVEL SCROLL TYPE TEXT SCROLL
VOL DISP
IPOD:
PLAYLISTS
ARTISTS
ALBUMS
SONGS
PODCASTS
GENRES
COMPOSERS
AUDIO BOOKS
PLAYLISTS
XM:
XM ADF*
12
SIRIUS:
CLEAR LOCK*
12
CLEAR SKIP*
12
SPORTS*
12
S-SEEK*
12
CLEAR LOCK*
12
HD RADIO:
STATION CALL*
13
DIGITAL SEEK*
13
STATION CALL*
13
*
4
If IMPRINT audio processor is connected, you can make more
detailed settings for the audio setting. For details, refer to
“IMPRINT Operation (Optional)” (page 32).
*
5
Displayed only when AUX ZONE is set to ON.
*
6
Displayed only when an external audio processor is connected.
*
7
Displayed only when MX is set to ON and an external audio
processor is connected.
*
8
Displayed only when BT IN is OFF.
*
9
The setting can be made only when AUX+/AUX ZONE/AUX is set to
ON.
*
10
Displayed only when DIGITAL AUX is set to ON.
*
11
Displayed only when AUX+ is set to ON.
*
12
Displayed only when SAT radio receiver is connected.
For the SAT Radio Setting, refer to “SAT Radio Receiver
(Optional)” (page 28).
*
13
Displayed only when HD Radio TUNER MODULE (TUA-T500HD
or TUA-T550HD) is connected.
4
Turn the Rotary encoder to change the setting,
and then press
/ ENTER
(e.g. Select POWER IC ON or POWER IC OFF.)
5
Press and hold for at least 2 seconds to return to
normal mode.
• Pressing during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Select BT from the setup main menu in step 2 above.
Make this setting when the BLUETOOTH INTERFACE (KCE-400BT)
is connected and the BLUETOOTH function is used. For details, refer
to the Owner’s Manual of the optional BLUETOOTH INTERFACE
(KCE-400BT).
Set ADPT when the BLUETOOTH INTERFACE (KCE-400BT) is
connected.
If an optional BLUETOOTH INTERFACE (KCE-400BT) is connected,
you can place a hands-free call by a BLUETOOTH-equipped mobile
phone. For details, refer to
“Hands-Free Phone Operation” (page 18).
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
•
When INT MUTE is set to ON, the BLUETOOTH setting cannot be
made. When the
BLUETOOTH INTERFACE
(KCE-400BT) is
connected, set INT MUTE to OFF. Refer to
“Turning Mute Mode On/
Off (INT MUTE)” (page 24).
Setting the BLUETOOTH Connection
SETUP
Follow steps 1 to 5 to choose an item to change. See the
item descriptions following Step 5 for further details.
Rotary encoder
FUNC./SETUP
/ENTER
TUNER/SOURCE
MUTE
BLUETOOTH Setting
BT IN ADPT / BT IN OFF (Initial setting)