Adcom GTP-760 Stereo Amplifier User Manual


 
6.0 CARE, MAINTENANCE, and SERVICE
CARING FOR YOUR GTP-760
ADCOM has taken great care to ensure your GTP-760 is as flawless in appearance as it is electronically. The
front panel is a heavy gauge, high-grade aluminum extrusion carefully finished and anodized for durability. The
chassis, top cover, and rear panels are powder-coated heavy gauge steel that have been baked to ensure a
lasting, durable finish. If the front panel, top or sides become dusty or finger printed, they can be cleaned with
a soft lint free cloth, slightly dampened with a very mild detergent solution or glass cleaner.
WARNING! Do not spray or pour liquids of any kind on the GTP-760.
SERVICING
ADCOM has a Technical Service Department to answer questions pertinent to the installation and operation of
your unit. In the event of difficulty, please contact us for prompt advice. Please have the following information
readily at hand: the unit’s model and serial numbers; and the dealer from which it was purchased. If your prob-
lem cannot be resolved through our combined efforts, we may refer you to an authorized repair agency, or
authorize return of the unit to our factory. To aid us in directing you to a convenient service center, it would be
helpful if you indicate which major city is most accessible to your home.
Please address mail inquiries to: Phone, Fax or E-mail inquiries to:
ADCOM Service Corporation Voice: 732-683-2356
10 Timber Lane Fax: 732-683-9790
Marlboro, NJ 07746-1444 Monday through Friday
USA 9:00AM to 5:00PM EST/EDT
E-mail: service@adcom.com
UNDER NO CIRCUMSTANCES SHOULD YOUR UNIT BE SHIPPED TO OUR FACTORY WITHOUT PRIOR
AUTHORIZATION, OR PACKED IN OTHER THAN ITS ORIGINAL CARTON AND FILLERS/LINERS.
For Fax inquires, please include a return Fax or voice telephone number for the reply. When calling or writing
about your GTP-760, be sure to note and refer to its serial number, as well as the date of purchase and the
dealer from whom it was purchased. In the event the unit must be returned to our factory for service, you will
be instructed on the proper procedure when you call or write for a Return Authorization. For warranty coverage, a
copy of the original proof of purchase is required. If you have no original copy, please contact your dealer to
obtain a duplicate copy.
If the original shipping carton and its fillers have been lost, discarded, or damaged, a duplicate carton may be
obtained from our Parts Department for a nominal charge.
Always ship PREPAID VIA UNITED PARCEL SERVICE (UPS) OR OTHER APPROVED CARRIER. DO NOT
SHIP VIA PARCEL POST, since the packaging was not designed to withstand rough Parcel Post handling.
FREIGHT COLLECT SHIPMENTS CANNOT BE ACCEPTED UNDER ANY CIRCUMSTANCES.
40