Filter
Top Products
m1 button is pressed
IF
main, DVD, dig. 1, or dig. 2 sources are active at the time you select that macro. If
you’ve programmed a Group 2 macro, it will send out an identical command sequence whenever tuner, CD,
VCR, or v. aux inputs are active.
Programming Macro Initiator Buttons:
1. Press either the Group 1 or Group 2 source selector button (main or tuner respectively) and the mute
button simultaneously. Hold both buttons until the red status LED and the input selector button
remain lighted.
2. Press the macro initiator button (power, m1, m2, m3 or m4) you wish to program.
3. Select and press up to 10 buttons you wish to store in the macro. Both source selector and function
buttons count as individual commands. Remember that each macro can hold only up to 10
individual commands.
4. Press the tuning up button to save the macro. The red status LED and input selector button will blink
twice to confirm programming and then turn off.
Please note:
* To add a power (on/off) command to the macro, use the mute button in place of the
power button.
* The tuning up/down buttons cannot be used in a macro sequence.
Deleting Macro Initiator Buttons:
1. Press either the Group 1 or Group 2 source selector button (main or tuner respectively) and the mute
button simultaneously. Hold both buttons until the red status LED and the input selector button
remain lighted.
2. Press the macro initiator button (power, m1, m2, m3 or m4) you wish to delete.
3. Press the tuning up button. The red status LED and input selector button will blink twice to confirm
deletion of the macro.
2.0 INSTALLING/CONNECTING THE GTP-760
2.1 Placement
Your system components need a stable, vibration-free supporting surface. Your ADCOM dealer will be
pleased to show you many different types of audio/video equipment racks and cabinets. Keep the
GTP-760 (and other audio/video components) away from moisture and out of direct sunlight.
Bear in mind that the GTP-760’s rear panel is the central connecting point for almost every component
in your audio/video system. Leave sufficient room behind the rear panel to accommodate cables,
antenna leads, power cords, etc. We recommend a minimum of 5" of free space behind the GTP-760
for maximum flexibility.
2.2 Connections
Section 1.2 above has already provided the information you need to successfully connect all the audio/
video components you will need for a sophisticated home theater system. Your ADCOM dealer will
be pleased to assist you should you require detailed answers to more advanced system
configuration questions.
28