Filter
Top Products
50 Level trim (Rear Up/Down, Center Up/Down, Sub Up/Down)
Rear Up
•In main mode, button is preprogrammed to increase both rear speaker levels simultaneously.
•In CD mode, button is preprogrammed to access disc 2 with ADCOM disc player.
• The button is programmable for use with any other source.
Rear Down
•In main mode, button is preprogrammed to decrease both rear speaker levels simultaneously.
•In CD mode, button is preprogrammed to clear “repeat” command with ADCOM disc player.
• The button is programmable for use with any other source.
Center Up
•In main mode, button is preprogrammed to increase center channel speaker level.
•In CD mode, button is preprogrammed to access disc 3 with ADCOM disc player.
• The button is programmable for use with any other source.
Center Down
•In main mode, button is preprogrammed to decrease center channel speaker level.
• The button is programmable for use with any other source.
Sub Up
•In main mode, button is preprogrammed to increase subwoofer level.
•In CD mode, button is preprogrammed to access disc 4 with ADCOM disc player.
• The button is programmable for use with any other source.
Sub Down
•In main mode, button is preprogrammed to decrease subwoofer level.
• The button is programmable for use with any other source.
51 Bal. chk (balance check)
•In main mode, button is preprogrammed to initiate balance check procedure with test tone and
BALANCE CHECK menu screens.
•In CD mode, button is preprogrammed to access disc 5/Memory Clear with ADCOM disc player.
• The button is programmable for use with any other source.
52 Dim
•In main and tuner modes, button is preprogrammed to dim GTP-760’s information display.
• The button is programmable for use with any other source.
53 M1, M2, M3, M4 (Macro keys)
M1
• In main mode, button is preprogrammed to select Tape 2 input (not applicable to GTP-760.)
• The button is programmable for use with any other source.
M2
• In main mode, button is preprogrammed to select Video 4 input (not applicable to GTP-760.)
• The button is programmable for use with any other source.
M3 and M4
• These buttons are programmable for use with any source.
54 Room 2
•In main mode, button is preprogrammed to turn Room 2 on, show Room 2 status and turn Room 2 off.
• The button is programmable for use with any other source.
55 Backlight
• No programming capabilities. Button backlights all keys for eight (8) seconds when pressed.
56 Mute
•In main, tuner, and CD modes, button is preprogrammed to mute outputs of device.
• The button is programmable for use with any other source.
57 Status LED
• Lights in different colors and patterns during learning operations as descriped in the remote
programming section
23