3M G5 Headphones User Manual


 
Maintenance
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 53 of 77
Low Battery Message
When the battery voltage is too low, the headset sounds a “change battery now”
message at fifteen-second intervals to alert the operator to install a fully charged
battery. The “change battery now” message continues for two minutes after
which the headset turns off automatically to prevent damage to the batteries.
Charging Batteries
To charge a battery, insert the battery in one of the charging slots.
The indicator lights RED to indicate the battery is charging.
The indicator lights GREEN to indicate the battery is charged.
Note:
Discharged
batteries
require 3 ½ hours to charge.
Note:
When the GREEN
indicator
lights, the battery is approximately 80%
charged. An additional 1/2 hour of charging is required to achieve maximum
charge.
Charging
Status
Indicator
Disposing of Batteries
To help protect the environment and conform to regulations, 3M™ Wireless
Communication System Model XT-1 rechargeable batteries must be returned to
3M at the end of their useful life. Contact your 3M representative for additional
instructions.
Making Sure Batteries are Ready for Use
Follow these tips to make sure batteries are always ready for use:
Have an extra battery for each headset. This helps ensure that a fully
charged battery is always available.
Recharge a low battery as soon as it is removed from the headset.
When a battery is low, repeat messages are heard in the headset for 2
minutes, and then the headset shuts off.
Keep the battery and charger contacts clean. Use a cotton swab and
approved cleaner in accordance with manufacturer’s instructions to
clean the contact surfaces.