Filter
Top Products
Maintenance
3M™ Drive-Thru Systems Model G5 and Model XT-1
Operating Instructions
November 6 2014 – Revision 2.1
Page 48 of 77
Maintenance
G5 Headset
Replacing the Carrier
If the Carrier is damaged, purchase a new Carrier to replace the damaged one by
performing the following steps
NOTE
: The Pod, Carrier and Batteries work ONLY when using authentic
parts from 3M. All three components have OEM authentication algorithm
implemented and will recognize and reject non-authentic parts.
Disassembling the Carrier from the Pod
Remove the battery
Unlock the Pod from the Carrier by sliding the Control Pod Locking Mechanism
to the unlocked position using a flat head screwdriver or other similar tool.
Gently separate the Pod from the Carrier.