using Start | Settings | Control Panel | Display | Backlight tab.
When enabled, the display, display backlight and keyboard backlight are turned off when the
timer expires. The timer is reset by the following primary events:
•
Keypress, or
•
Mouse movement, or
•
Touchscreen touch
For more information on configuring Microsoft Windows CE .NET Power Management, please
refer to the VX6 Reference Guide.
Laser Barcode Scanner Warnings
•
Do not look into the laser’s lens.
•
Do not stare directly into the laser beam.
•
Do not remove the laser caution labels from the scanner.
•
Do not connect the laser barcode module to any other device.
Caution:
Please read the caution labels.
Avoid exposure. Laser light is emitted from the scanner’s aperture.
Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
The scanner uses laser light. The following labels are representations of caution and
warning labels placed on laser scanners.
Do not pour, spray, or spill any liquid on the scanner. The Barcode Scanner contains the
circuitry, scanning motor and laser. Handle with appropriate care.
