A SERVICE OF

logo

Open as PDF
next previous
Step 2 – Attach RAM Mount Ball to the VX6
1. Turn the VX6 off before attaching the RAM mount ball.
2. Place the VX6 face down on a stable surface.
3. Position the RAM ball bracket on the rear of the VX6, aligning the curved edge on the RAM
mount bracket with the curved edge on the VX6. Attach with four 1/4-20x5/8 bolts, using
one flat washer and one locking washer per bolt. Place the locking washer on the bolt before
the flat washer.
Caution
Failure to use one ¼ flat washer and one ¼ locking washer per bolt can result in damage to
the backplate of the VX6 computer.
Step 2 – Attach VX6 Assembly to RAM Mount
Slip the RAM arm over the ball on the vehicle RAM ball bracket. Insert the ball of the RAM
mount bracket into the RAM arm. Adjust the VX6 to the desired position and tighten the knob
on the RAM arm using the supplied RAM wrench.