When you have finished using the scanner, remove it from the VX6 and store the scanner in a
closed container or bag.
Refer to the documentation received with the barcode scanner for complete instructions.
Connect Serial Printer or PC
Refer to the documentation received with the printer or PC for complete instructions.
Pin 9 of COM3 (labeled “COM2/3”) is configured to provide RI. To change Pin 9 of the port,
please refer to Chapter 4, “System Configuration” in the “VX6 Reference Guide”.
The printer or PC cable requires a nine-pin D-shell female connector for the VX6.
The printer or PC cable is attached to the connector labeled “COM2/3”.
Note: Use of a shielded cable is required to maintain FCC and CISPR22 emissions compliance.
1. Power off the VX6 before connecting the cable to the VX6.
2. Seat the connector firmly over the pins and turn the thumbscrews in a clockwise direction.
Do not overtighten.
3. Use a strain relief clamp to secure the cable.
4. Press the power button to power up the VX6.
