A SERVICE OF

logo

RAM Mount System
Components
RAM Mounting Assembly
The RAM mounting assembly consists of the following parts:
1. VXX RAM ball bracket
2. RAM arm, size D
3. RAM ball base
- or -
RAM clamp mount
RAM Clamp Mount includes:
Upper Clamp Piece with Ball
Lower Clamp Piece
Bolts (2 each)
Nylon locking nuts (2 each)
4. Hardware:
Bolts, 1/4-20x5/8 (4 each)
Washers, 1/4 locking (4 each)
Washers, 1/4 flat (4 each)
RAM wrench
Torque Measurements
You will need a torquing tool capable of torquing to 50 inch pounds (5.64±.56 N/m).
Torque all screws and bolts according to the following table:
For these screws and bolts… Torque to
1/4 bolts 50.0±5 in/lb (5.64±.56 N/m)