Secondary Keys LED
The keyboard is equipped with several secondary keys. These keys are identified by the
superscripted text found on the keyboard keys. The secondary keys are accessible by using
two (2) keystrokes: the <2
nd
> key followed by the superscripted key.
Once the <2
nd
> state is enabled (by pressing the <2
nd
> key) the Secondary Mode LED is
illuminated and the <2
nd
> state is enabled until another key is pressed. The <2
nd
> key is
toggled on with a <2
nd
> keypress and then immediately off with another <2
nd
> keypress.
For example:
Press <2
nd
> and <F1> to turn CapsLock on and off.
Press <2
nd
> and <↑> to initiate the PgUp command.
Press <2
nd
> and <Q> to type the “!” key.
Press <2
nd
> and <BkSp> to enter the Insert (Ins) mode.
Control Keys
The keyboard has several control keys, which are not used on the VX6.
Note: The 2
nd
functions of the <F4> and <F5>keys are not used as the display brightness is
adjusted via the buttons on the control panel.
The 2
nd
functions of the <F6>, and <F7> keys are not used as the VX6 has TFT LCD
screen with no provision for contrast adjustments.
The 2
nd
functions of the <F8> and <F9> keys are not used as the sound volume on the
VX6 is controlled with the Volume and Sounds icon in the Microsoft Windows CE .NE
Control Panel.
The 2
nd
function of the <F10> key is not used as the display backlight timer also
controls the keyboard backlight.
