How To: Connect VX6 without a UPS Battery Pack
1. Connect the power cable to the vehicle’s electrical system as described in “Connect Vehicle
12-80VDC Connection”.
2. Connect the power cable to the VX6 by aligning the water-tight connector pins to the power
connector on the bottom of the VX6; push down on the water-tight connector and twist it to
fasten securely.
3. Turn the VX6 on.
How To: Connect VX6 to a Integrated Mount UPS Battery Pack
1. Connect the power cable to the vehicle’s electrical system as described in “Connect Vehicle
12-80VDC Connection”.
2. Connect the power cable to the UPS battery pack by aligning the water-tight connector pins
to the input connector (labeled “From Vehicle”); push down on the water-tight connector and
twist it to fasten securely.
3. Connect the output cable (labeled “To Computer”) from the UPS battery pack to the power
connector on the bottom of the VX6 by aligning the water-tight connector to the power
connector; push down on the water-tight connector and twist it to fasten securely.
4. Turn the VX6 on.
How To: Connect VX6 to a Remotely Mounted UPS Battery Pack
1. Connect the power cable to the vehicle’s electrical system as described in “Connect Vehicle
12-80VDC Connection”.
2. Connect the power cable to the UPS battery pack by aligning the water-tight connector pins
to the input connector (labeled “From Vehicle”); push down on the water-tight connector and
twist it to fasten securely.
3. Connect the output cable (labeled “To Computer”) from the UPS battery pack to the extension
cable by aligning the water-tight connector to the input end of the extension cable; push
down on the water-tight connector and twist it to fasten securely.
4. Route the extension cable the shortest way possible. The cable is rated for a maximum
temperature of 105°C (221°F). When routing this cable it should be protected from physical
damage and from surfaces that might exceed this temperature.
Do not expose the cable to chemicals or oil that may cause the wiring insulation to
