Display and Touchscreen
The VX6 Display is a thin-film transistor display capable of supporting Half SVGA+ graphics
modes. Display size is half screen, 800 x 320 pixels. The display covering is designed to resist
stains. The touch screen allows signature capture and touch input.
The touch screen is a Resistive Panel with a scratch resistant finish that can detect touches by
a stylus, and translate them into computer commands. In effect, it simulates a computer
mouse. Only Delrin or plastic styluses should be used.
Note: Always use the point of the stylus for tapping or making strokes on the display. Never
use an actual pen, pencil or sharp object to write on the touch screen.
An extra or replacement stylus may be ordered from LXE. See the “Accessories” section for the
stylus part number.
Adjusting Screen Display
The color TFT display is an active source of light. The VX6 display brightness can be adjusted
via the brightness control keys located on the VX6 control panel. Pressing the brightness up
button increases the display brightness incrementally until maximum brightness is achieved.
Likewise, pressing the brightness down button decreases the display brightness until minimum
brightness is achieved. Because there are 64 incremental levels of brightness intensity, a
single press of either brightness adjustment button may not be noticeable. The up or down
button can be pressed and held to accelerate brightness adjustment.
Note: The 2
nd
functions <F4>, <F5>, <F6>, and <F7> keys have no function on the VX6.
There are no provisions for adjusting the contrast of the display. The display remains on
unless Microsoft Windows CE .NET power management is configured to turn the display off
after a certain period of inactivity.
Cleaning the Display
Keep fingers and rough or sharp objects away from the display. If the glass becomes soiled or
smudged, clean only with a standard household cleaner such as Windex
®
without vinegar or
use Isopropyl Alcohol. Do not use paper towels or harsh-chemical-based cleaning fluids since
