Central Management 91
Traffic Counters for Selected Port
To select traffic counters, type
2 in the
Monitoring Menu
(Figure 67),
press <Enter>, and the desired port number, and press <Enter>, as in
Figure 70
.
Figure 70 Select Traffic Counters and Port
Detailed Ethernet and HDLC traffic counters appear, as in Figure 71.
Figure 71 Traffic Counters for Selected Port
In Figure 71, the traffic directions for Ethernet and HDLC are indicated:
■ Ethernet
■
TX, from the VCN AP.
■
RX, to the VCN AP.
■
HDLC
■
TX, to the VCN AP.
■
RX, from the VCN AP.
Pressing <Enter> displays VDSL information for the selected port, as in
Figure 73
.
Please enter your choice: 2
Enter port number (1 - 24):1
Traffic Counters for Port 3
-------------------------------------------------------------------
Transmit counters | Ethernet counters HDLC counters
-------------------------------------------------------------------
Tx frames_________ | 484073854 2
Tx errors_________ | 0 0
Discards__________ | 0 -
-------------------------------------------------------------------
Receive counters |
-------------------------------------------------------------------
Rx frames_________ | 0 484073854
CRC errors________ | 0 0
Frames not aligned | 0 1
Overruns__________ | 0 0
Frames too long___ | 0 0
Discards__________ | 0 110
Collisions________ | 0 -
Frames too short__ | 0 -
Abort sequences___ | - 4
Not mine__________ | - 0
Press ENTER to continue ...
