Line Card Management 73
5
Ty p e
y and press <Enter> to reset. A message that the system is going
down is displayed followed by the
Operation Mode Selector
Menu
in
Figure 47
:
Figure 47 Operation Mode Selector Menu
6
Ty p e
S; the downloading message in Figure 48 appears.
The choice of
F
in the Operation Mode Selector (Figure 47), is the default;
if the Software Download Menu displays for 5 seconds, execution from
the flash automatically begins. The choice of
D
is for debug purposes only
and should only be carried out by system developers. Option
C
is for
entering the MAC address. This is normally performed in the factory.
Figure 48 The Downloading Message
7
In the Procomm Plus window shown in Figure 49
, select
Data
>
Send File
(Figure 50
).
********************************************************
3Com NCD. (C)
10Base-S Boot loader V2.00
Date: Jun 15 1999, Time: 16:13:31
CPE modem Operation Mode Selector.
Enter:
S - for Serial loading OR
D - for Debug operation OR
F - for SW execution from the Flash OR
C - for MAC address programming.
********************************************************
**************************
Load Procedure via Serial Line
**************************
Waiting for downloading...
