Central Management 111
The procedures in this menu are identical to the procedures in the
Reset
Agent
of the LMA interface. For more information, see Reset Agent
,
page 104
.
Exiting the Telnet Management Session
The Telnet management session can be closed in the following ways:
■ The LMA user closes the session through the LMA interface.
No notification appears on the Telnet screen.
■ The management agent or LC 1 is reset.
No notification appears on the Telnet screen.
■ The Telnet user closes the Telnet program or disconnects the Telnet
work station.
■ The Telnet user ends the Telnet session by using the Exit option in the
central management menus.
To end the Telnet session by using the
Exit option, perform the
following:
1
In the
VCN Access Concentrator Menu
, type
0 and press <Enter>; the
message appears:
Are you sure you want to terminate the Telnet session? (y/n)
[n]:
1
To terminate, type
y and press <Enter>; the message appears:
Aborting due to user request...
The Telnet session is closed.
