58 M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
Figure 32
The Ethernet Menu
The
Ethernet Menu
options are described in Ta b l e 1 0 .
Ethernet Traffic Counters
The Ethernet traffic counters count normal frames and errored frames
transferred between the VCN AC and the Ethernet Switch.
To check the Ethernet traffic counters, type
1
in the Ethernet Menu
(Figure 32
), and press <Enter> to view Ethernet traffic counters; the
Ethernet traffic counters screen appears (Figure 33
).
Table 10
Ethernet Menu Options
Ethernet Menu
Options Feature How to use
Traffic counters Displays traffic counters Refer to “Ethernet Traffic
Counters” on page 58.
Ethernet Status Displays line status, including
normal or loopback mode
and duplex mode
Refer to “Ethernet Status”
on page 59.
Reset Counters Returns traffic counters to
zero
To reset Ethernet counters
from the
Ethernet Menu
,
type 3 and press <Enter>.
Change Work Mode Enables setting internal and
external loopbacks, normal
mode, and the setting of half
and full duplex mode
Refer to “Change Ethernet
Work Mode Menu” on
page 60.
Ethernet Menu
-------------
1. Traffic Counters
2. Ethernet Status
3. Reset Counters
4. Change Work Mode
0. Return to Previous Menu
Please Enter your choice:
