100 M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
Change the Concentrator Password
1
To change the password for all line cards in the concentrator, type
3
in the
Concentrator Configuration Menu
(Figure 77
) and press <Enter>
.
The
message appears:
This action will change the password in
all line cards in the Access Concentrator
Enter the old password: *****
2
Type your current password and press <Enter>. The message appears:
Enter the new password (up to 8 characters): *****
3
Type your new password and press <Enter>. The message appears:
Confirm new password (up to 8 characters): *****
4
Type your new password and press <Enter>. The message appears:
The password was changed and saved in all line cards
The default login is admin; the default password is null—just press
<Enter>.
If you forget your password, contact technical support. Refer to
Appendix D
Technical Support.
Agent Configuration Menu
To configure VCN AC management, type
5
in the
Management Agent
Menu
(Figure 64
) and press <Enter>. The
Agent Configuration Menu
(Figure 78
) appears:
Figure 78
Agent Configuration Menu
Agent Configuration Menu
------------------------
1. IP Menu
2. Close Telnet Session
3. Reset to Factory Defaults
4. Reset the Agent card
0. Return to Previous Menu
Please enter your choice:
