A SERVICE OF

logo

Line Card Management 69
To reset the counters, type y and press <Enter>. The confirmation
appears (Figure 42
).
Figure 42 Action Confirmed
To reject the option, type n and press <Enter>. The message appears:
Figure 43 Action Canceled
Reset the Line Card
To reset the LC board, type
5 in the
Management Menu
(Figure 31) and
press <Enter>; the messages in Figure 44
appear:
Figure 44 Reset Board Confirmation
To reject, press <Enter> or type n and press <Enter>. The
Management
Menu
reappears.
To proceed type
y and press <Enter>; the message appears:
The system is going down...
The
Operation Mode Selector Menu
(Figure 47) appears.
If this menu is ignored for 5 seconds, default execution from the flash
begins and the messages in Figure 54
and Figure 55 appear:
The Login message appears:
Login:
The action has been done
Press ENTER
The action has been canceled
Press ENTER to continue ...
This action will reset the whole board
Do you want to proceed (Y/[N])? :