Filter
Top Products
96
Using the On Screen Menu
Set the Disc Lock “On”/“Off”. Page 83
Adjust the level from 0 to +8. Page 82
Enter the password. Page 81
Change the password. Page 82
Set to match your TV screen aspect.
4:3 panscan
4:3 letterbox
Wide-screen (Widescreen)
Set the video signal system*
2
to match your TV.
Set to AUTO when using a TV compatible with
both NTSC and PAL.
(U.K. and Europe models only) Sets the output
signal of AV MONITOR OUT jack to YUV or
RGB.
Set the language you usually select for subtitles.
When playing a disc, the subtitles in the selected
language appear first. When the disc does not
contain the selected subtitle language, the subtitle
of that language will not appear.
Disc Lock
Parental level
Enter PIN
Change PIN
TV shape
Access
TV*
1
Setup
TV System
Video Output
Language
Setting ContentSetting ItemSubmenuMain Menu
Default Sub-title
(Default Subtitle)
Select the country where you use CinemaStation.
Set the language for the On Screen Menu.
Set the language you usually select for audio.
Country
Menu Language
When playing a disc, you hear the audio in the
selected language first. When the disc does not
contain the selected language you selected, it will
play in another language.
Select the output signal for the OPTICAL OUT
jack. The speaker sound changes depending on
the setting for this menu item.
All: Outputs all types of digital signals that
CinemaStation can reproduce.
PCM Only: Outputs the Pro Logic decoded
signal only.
Set Playback Control “On”/“Off”. If set to “Off”,
the Disc Menu does not appear on the TV screen.
Default Audio
Features PBC
*
1
Be careful when setting this menu item. If it does not match your TV, the menu and playback screen will not appear
properly or will not appear on the TV. If that happens, refer to “Recover TV settings” below.
*
2
This unit can play PAL and NTSC, but your television must match the system used on the disc.
Recover TV settings
When the screen does not appear properly due to TV setting, perform the steps below to recover the setting.
1 Press DVD/CD.
2 Press s for 5 seconds. NTSC<->PAL appears in the CinemaStation Display.
3 Press e to switch the setting. NTSC/PAL SET appears in the CinemaStation Display.
When connecting with AV MONITOR OUT (U.K. and Europe models only)
1 Perform steps 1 and 2 above.
2 Press s again. YUV<->RGB appears in the CinemaStation Display.
3 Press e to switch the setting. YUV/RGB SET appears in the CinemaStation Display.
Audio Menu Digital output
018DVX-S200-en 04.3.1, 11:22 AM96