Yamaha RX-V2700 Stereo Receiver User Manual


 
92 En
GRAPHIC USER INTERFACE (GUI) SCREEN
Stereo program parameter descriptions
Sound field parameter Features
Rev. Level
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the
stronger the reverberation becomes.
Control range: 0 to 100%
Dialogue Lift
Dialogue lift. Adjusts the height of the front and center channel sounds by assigning some of the
front and center channel elements to the presence speakers. The larger the parameter, the higher
the position of the front and center channel sound.
Choices: 0, 1, 2, 3, 4, 5
Sound field parameter Features
2ch Stereo
Direct
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo
sound when playing 2-channel analog sources.
Choices: Auto, Off
y
Select “Auto” to bypass the decoders, DSP processors and the tone control circuitry only when
“BASS” and “TREBLE” are set to 0 dB (see page 52).
Select “Off” not to bypass the decoders, DSP processors and the tone control circuitry when
“BASS” and “TREBLE” are set to 0 dB.
When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2
channels and output from the front left and right speakers.
The low-frequency signals input from the front left and right speakers are redirected to the
subwoofer in the following cases:
– “Bass Out” is set to “Both” (see page 107).
– “Front” is set to “Small” (see page 105) and “Bass Out” is set to “SWFR” (see page 107).
7ch Stereo
Center Level
Surround L Level
Surround R Level
Sur. Back Level
Presence L Level
Presence R Level
7-channel stereo center, surround left, surround right, surround back, presence left and presence right
levels. Adjusts the volume level of each channel in the 7-channel stereo mode.
Control range: 0 to 100%
Source sound
Level
Rev. Level
Time