Yamaha RX-V2700 Stereo Receiver User Manual


 
136 En
ADVANCED SETUP
Tuner frequency step TUNER FRQ STEP
(Asia and General models only)
Use this feature to set the tuner frequency step according
to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
Select “AM10/FM100” for North, Central and South
America.
Select “AM9/FM50” for all other areas.
Bi-AMP BI-AMP
Use to activate or deactivate the bi-AMP function.
Choices: ON, OFF
Select “ON” if you want to activate the bi-AMP
function.
Select “OFF” if you want to deactivate the bi-AMP
function.
When “BI-AMP” is set to “ON”, the SURROUND BACK
terminals cannot be used to connect surround back speakers in
that the SURROUND BACK terminals are already used for the
bi-AMP connection (see page 19).
Video reset VIDEO RESET
Use to initialize the parameter settings for “Video” in
“Manual Setup” (see page 101).
Choices: YES, CANCEL
The parameter setting for “Short Message” or “On Screen” is not
initialized (see page 101).
Network reset NETWORK RESET
Use this feature to reset the network settings of this unit
(see page 109) to the initial factory settings.
Choices: CANCEL, RESET
Select “CANCEL” not to reset any network settings of
this unit.
Select “RESET” to reset the network settings of this
unit.
The initial factory settings are activated next time you turn on
this unit.
When the network settings are reset, “DHCP” in “NET/USB” is
automatically set to “On” (see page 109) and the registered
client ID of this unit on your YAMAHA MCX-2000 is cleared
(see page 80).
TV format TV FORMAT
Use this feature to set the color encoding format of your
television.
Choices: NTSC, PAL
Initial setting:
[U.S.A., Canada, General and Korea models]: NTSC
[Other models]: PAL
This parameter setting only affects the video monitor connected
to the MONITOR OUT jacks and does not affect the Zone 2
video monitor connected to the ZONE 2 VIDEO jacks.
Monitor check for HDMI up-scaling
MONITOR CHECK
Use this feature to activate or deactivate the monitor check
function of this unit. When this parameter is set to “YES”,
this unit receives the information of the available video
signal resolutions from the video monitor connected via
HDMI (see page 102).
Choices: YES, SKIP
GUI language GUI LANGUAGE
Use this feature to select the language of your choice that
appears in the GUI (graphical user interface) menu of this
unit.
Choices: ENGLISH (English), JAPANESE (Japanese),
FRENCH (French), GERMAN (German), SPANISH
(Spanish), RUSSIAN (Russian)
Note
Note
Notes
Note