Yamaha RX-V2700 Stereo Receiver User Manual


 
138 En
ADVANCED SETUP
Setting remote control tuner ID or XM ID
1 Set the operation mode selector to AMP or
SOURCE and then press TUNER or XM on
the remote control to select the tuner or XM
to change the remote control ID.
2 Press and hold LEARN for about 3 seconds
using a ballpoint pen or similar object and
then press l / h repeatedly until “L;TUN”
and “TUNER”, or “L;TUN” and “XM”
alternately appear in the display window on
the remote control.
Be sure to press and hold LEARN for at least 3 seconds,
otherwise the learning process will start.
If you do not complete each of the following steps within
30 seconds, the setting mode will be automatically
canceled. In this case, start over from step 1.
3 Press ENTER.
The four-digit code set for the selected input area
appears in the display window on the remote control.
4 Press the numeric buttons to enter the
four-digit remote control code for the input
area you want to use.
Remote control tuner codes
Select one of the following codes to set the remote control
tuner code for the input area you want to use.
Remote control XM codes
Select one of the following codes to set the remote control
XM code for the input area you want to use.
You need to set the corresponding remote control tuner ID
or XM ID (see page 135).
5 Press ENTER to set the number.
“OK” appears in the display window if setting was
successful.
“NG” appears in the display window if the setting
was unsuccessful. In this case, start over from step 1.
6 Press LEARN again to exit from the setup
mode.
Notes
XM
TUNER
TV
SOURCE
AMP
TV
SOURCE
AMP
or
or
LEARN
A/B/C/D/E
PRESET/CH
ENTER
A/B/C/D/E
PRESET/CH
ENTER
Tuner library
code
(remote control
setting)
Function
Remote
control
tuner ID
2602
(initial setting)
To operate this unit using the
default code.
ID1
(initial setting)
2603
To operate this unit using an
alternative code.
ID2
XM library
code
(remote control
setting)
Function
Remote
control XM
ID
2604
(initial setting)
To operate this unit using the
default code.
ID1
(initial setting)
2605
To operate this unit using an
alternative code.
ID2
Note
4
3
2
0
9
5
1
7
6
8
STEREO
SUR. DECODE
SELECT
EXTD SUR.
CLASSICAL
LIVE/CLUB
ENTERTAIN
MOVIE
A/B/C/D/E
PRESET/CH
ENTER
LEARN