Yamaha RX-V2700 Stereo Receiver User Manual


 
42 En
PLAYBACK
This unit comes with a variety of input jacks. Use this
feature (Audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
We recommend setting Audio input jack select to “AUTO” in
most cases.
You can adjust the default Audio input jack select of this unit by
using “Audio Select” in “Option” (see page 114).
You can also set Audio input jack select setting in “Audio
Select” in “Input Select” (see page 96).
1 Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
2 Press AUDIO SELECT on the front panel (or
AUDIO SEL on the remote control) repeatedly
to select the desired Audio input jack select
setting.
AUTO Automatically selects input signals in
the following order:
(1)HDMI
(2)Digital signals
(3)Analog signals
HDMI Selects only HDMI signals. When
HDMI signals are not input, no sound
is output.
COAX/OPT Automatically selects input signals in
the following order:
(1)Digital signals input at the
COAXIAL jack.
(2)Digital signals input at the
OPTICAL jack.
When no signals are input, no sound is
output.
ANALOG Selects only analog signals. If no
analog signals are input, no sound is
output.
This feature is not available when no digital input jack
(OPTICAL, COAXIAL and HDMI) are assigned. Use “I/O
Assignment” in “Input Select” to reassign the respective
input jack (see page 96).
Selecting audio input jacks
(AUDIO SELECT)
INPUT
V
-
AUX/DOCK
DTV
DVR/VCR 2
VCR 1
DVD
CBL/SAT
MD/TAPE
CD-R
PHONO
CD
MULTI CH IN
or
Front panel
Remote control
CD-R
CD
PHONO
M
ULTI
CH
TUNER
MD/TAPE
DVD
DTV
NET/USB
VCR 1
CBL/SAT
DVR/VCR 2
V-AUX
A.SEL: AUTO
AUDIO SEL
Currently selected
Audio input jack
select setting
Available input sources
or
SELECT
AUDIO
Note