Yamaha RX-V2700 Stereo Receiver User Manual


 
37 En
AUTO SETUP
PREPARATION
9 Repeat steps 7 and 8 until you set all the
desired parameters.
This unit performs the following checks:
Wiring (Speaker wiring)
Checks which speakers are connected and the
polarity of each speaker.
Distance (Speaker distance)
Checks the distance of each speaker from the
listening position and adjusts the timing of each
channel.
Size (Speaker size)
Checks the frequency response of each speaker and
sets the appropriate low-frequency crossover for each
channel.
Choices: Check, Skip
Select “Check” to automatically check and adjust
the item.
Select “Skip” to skip the item and perform no
adjustments.
Equalizing (Parametric equalizer level)
Adjusts the frequency and the parametric equalizer
level of each channel to reduce coloration across the
channels and create a cohesive sound field. This is
particularly important if you use different brands or
sizes of speakers for some channels or have a room
with unique sonic characteristics. In addition, the
frequency response of each channel is adjusted in
accordance with the sound output from your front
speakers.
Choices: Check:Natural, Check:Flat, Check:Front,
Skip
Select “Check:Natural” to average out the
frequency response of all speakers with higher
frequencies being less emphasized. Recommended
if the “Check:Flat” setting sounds a little harsh.
Select “Check:Flat” to average the frequency
response of all speakers. Recommended if all of
your speakers are of similar quality.
Select “Check:Front” to adjust the frequency
response of each speaker in accordance with the
sound of your front speakers. Recommended if
your front speakers are of much higher quality than
your other speakers.
Select “Skip” to skip the selected item and perform
no adjustments.
Level (Volume level)
Checks and adjusts the volume level of each speaker.
Choices: Check, Skip
Select “Check” to automatically check and adjust
this item.
Select “Skip” to skip this item and perform no
adjustments.
10 Once you have selected the desired settings
of each parameter, press l to return to the
previous menu level and then press n to
select “Start”.
Skip
Check
Wiring
Distance
Size
Skip
Check
Distance
Size
Equalizing
Wiring
Skip
Check
Size
Equalizing
Level
Distance
Wiring
Skip
Check: Natural
Check: Flat
Check: Front
Equalizing
Level
Size
Distance
Skip
Check
Level
Equalizing
Size
Start: ENTERStart
Setup Menu
Information