Yamaha RX-V2700 Stereo Receiver User Manual


 
117 En
GRAPHIC USER INTERFACE (GUI) SCREEN
ADVANCED
OPERATION
Audio information
Format (Signal format)
Signal format. When this unit cannot detect a digital
signal, it automatically switches to analog input.
“---” appears when this unit cannot detect any signals.
Sampling (Sampling frequency)
The number of samples per second taken from a
continuous signal to make a discrete signal.
“---” appears when this unit cannot detect the sampling
frequency.
Channel (Input channel)
The number of source channels in the input signal
(front/surround/LFE). For example, a multi-channel
soundtrack with 3 front channels, 2 surround
channels and LFE, is displayed as “3/2/0.1”.
“---” appears when there is no source channel available.
Bitrate (Bit rate)
The number of bits passing a given point per second.
“---” appears when this unit cannot detect the bit rate.
Dialogue
(Dialogue normalization level)
The dialogue normalization level preset to the current
input Dolby Digital and DTS signal.
Flag1/Flag2 (Signal flags)
Flag data encoded in DTS, Dolby Digital, or PCM
signals that cue this unit to automatically switch
decoders.
Video information
HDMI Signal (HDMI signal type)
Type of the source video signals and the video signals
output at the HDMI OUT jack of this unit.
HDMI Resolution (HDMI resolution)
Resolution of the source video signals and the video
signals output at the HDMI IN jacks of this unit.
Analog Resolution (Analog resolution)
Resolution of the source video signals and the analog
video signals output at the COMPONENT
MONITOR OUT jacks of this unit.
HDMI Error (HDMI Error)
Error message for HDMI sources or connected
HDMI devices. See page 144 for details.
Use this feature to select the language of the menu items
and messages that appears in the GUI (graphical user
interface) screen of this unit.
Choices: English (English), (Japanese),
Français (French), Deutsch (German),
Español (Spanish), Русский (Russian)
y
You can also select the GUI language using the “GUI
LANGUAGE” parameter in “ADVANCED SETUP” in the front
panel display (see page 136).
1 Set the operation mode selector to AMP and
then press SET MENU on the remote control.
The top display appears.
2 Press n on the remote control repeatedly to
select Language and then press h.
3 Press k / n on the remote control repeatedly
to select the language of your choice.
4 Press ENTER to confirm your selection.
Note
Note
Note
Note
Language
MENU
SRCH MODE
SET MENU
TV
SOURCE
AMP
Sound
Video
Option
Basic
NET/USB
Manual Setup
Auto Setup
System Memory
Input Select
Stereo/Surround
Français
English
Language
Signal Info.
System Memory