Yamaha RX-V2700 Stereo Receiver User Manual


 
106 En
GRAPHIC USER INTERFACE (GUI) SCREEN
Surround (Surround left/right speakers)
Choices: Large, Small, None
Select “Large” (large) if you have large surround left
and right speakers that reproduce low-frequency
signals effectively. All the surround channel signals are
directed to the surround left and right speakers.
Select “Small” (small) if you have small surround left
and right speakers that do not reproduce low-frequency
signals effectively. The low-frequency signals of the
surround left and right channels are directed to the
speakers selected in “LFE/BASS OUT”.
Select “None” (none) if you did not connect surround
speakers. This unit is set to the Virtual CINEMA DSP
mode (see page 51) and “Surround Back” is
automatically set to “None”.
Surround Back (Surround back left/right
speakers)
Choices: Large x1, Small x1, Small x2, Large x2, None
Select “Large x1” (large x 1) if you have a large
surround back speaker that reproduces low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
speaker.
Select “Small x1” (small x 1) if you have a small
surround back speaker that does not reproduce low-
frequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in “LFE/BASS OUT”
and the rest of the signals are directed to the surround
back left speaker.
Select “Small x2” (small x 2) if you have two small
surround back speakers that do not reproduce low-
frequency signals effectively. The low-frequency
signals of the surround back left and right channels are
directed to the speakers selected in “LFE/BASS OUT”.
Select “Large x2” (large x 2) if you have two large
surround back speakers that reproduce low-frequency
signals effectively. All the surround back left and right
channel signals are directed to the surround back left
and right speakers.
Select “None” (none) if you did not connect surround
back speakers. The surround back channel signals are
directed to the surround left and right speakers.
Presence (Presence speakers)
Use this feature if you want to use the presence speakers
connected to this unit.
Choices: Yes, None
Select “NONE” (none) if you did not connect presence
speakers.
Select “YES” (yes) if you connected presence speakers
and want to use them.
Large
Small
NoneSurround Back
Presence
Surround
Center
Front
Large x1
Small x1
Large x2
Small x2
Surround Back
Presence
Bass Out
Surround
Center
None
Yes
Surround Back
Presence
Bass Out
Bass Cross Over
Surround