Yamaha RX-V2700 Stereo Receiver User Manual


 
28 En
CONNECTIONS
This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and
SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or
pre-amplifier.
If you set “Input Channels” to “8ch” in “MULTI CH” (see page 97), you can use the input jacks assigned as “Front
Input” in “Multi CH Assign” (see page 97) together with the MULTI CH INPUT jacks to input 8-channel signals.
Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to
match the left and right outputs to the left and right input jacks for the front and surround channels.
When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 43), this unit automatically
turns off the digital sound field processor, and you cannot select sound field programs.
This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that
you connect at least a 5.1-channel speaker system before using this feature.
For 6-channel input For 8-channel input
*1
The analog audio input jacks assigned as “Front Input” in
“Multi CH Assign” (see page 97).
Connecting a multi-format player or an external decoder
Notes
MULTI CH INPUT
SUB
WOOFER
CENTER
FRONT(6CH)
SURROUND
SB(8CH)
R
L
LR
LR
Subwoofer
out
Multi-format player/
External decoder
Center out
Surround
out
Front out
Note
MULTI CH INPUT
SUB
WOOFER
SUB
WOOFER
CENTER
CENTER
FRONT(6CH)
SURROUND
SB(8CH)
TAPE
MD/
(REC)
(PLAY)
UT
R
L
*1
R
L
LR
LRLR
Multi-format player/
External decoder
Front out
Subwoofer
out
Center out
Surround back out
Surround out