Filter
Top Products
94 En
GRAPHIC USER INTERFACE (GUI) SCREEN
Use this feature to reassign digital input/outputs, select the
input signal, rename the inputs, or adjust the level of the
signal input at each input source.
• Some parameters described above may not be available for all
input sources and some parameters are only available for
specific input sources.
• When iPod is stationed in a YAMAHA iPod universal dock
(such as YDS-10, sold separately) connected to the DOCK
terminal of this unit, “DOCK” appears in the “Input Select”
menu instead of “V-AUX”. In such cases, the parameters
marked with asterisk (*) in the above table does not appears in
the input source parameter menu.
• When you select “NET/USB” as the input source, selected sub
input source (PC/MCX, NET RADIO or USB) appears in the
Input Select menu.
1 Set the operation mode selector to AMP and
then press SET MENU on the remote control.
The top display appears.
2 Select “Input Select” and then press h.
3 Select the desired input source (CD, DVD,
etc.) and then press h or ENTER to access
and adjust.
■ Antenna Level (Antenna level)
Use this feature to check the current reception level of the
XM Passport System connected to the XM jack of this
unit (see page 63). For the best reception, orient the XM
Passport System so that a value of 60% or more is
displayed here.
Display status: None, 0 to 100%
• “None” is displayed if the XM Passport System is not connected to
this unit. In this case, check the antenna connections (see page 63).
• The “Antenna Level” parameter cannot be adjusted by using the
remote control. Instead, you need to adjust the orientation of the
XM Passport System connected to the XM jack of this unit for a
better percentage of the reception level.
Input Select
Input source Parameter
XM
(U.S.A. and Canada models
only)
Antenna Level
Volume Trim
Rename
TUNER
Volume Trim
Rename
PHONO
CD
CD-R
MD/TAPE
DVD
DTV
CBL/SAT
VCR1
DVR/VCR2
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
V-AUX or DOCK
I/O Assignment*
Audio Select*
Decoder Mode*
Volume Trim
Rename
PC/MCX, NET RADIO or
USB
Volume Trim
MULTI CH
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
Multi CH Assign
BGV
Notes
Notes
MENU
SRCH MODE
SET MENU
TV
SOURCE
AMP
Sound
Video
Option
Basic
NET/USB
Manual Setup
Auto Setup
System Memory
Input Select
Stereo/Surround
MD/TAPE
CD-R
DTV
CBL/SAT
DVD
Input Select
Manual Setup
Auto Setup
Stereo/Surround
100%
Antenna Level
Antenna Level
Volume Trim
Rename