Filter
Top Products
128 En
REMOTE CONTROL FEATURES
■ Clearing a learned function
You can clear the function learned for a certain button in
each control area.
1 Set the operation mode selector to AMP or
SOURCE and then press an input selector
button to select the input area containing the
function you want to clear.
The selected component name appears in the display
window.
2 Press LEARN using a ballpoint pen or similar
object.
“LEARN” and the selected component name
(ex. “DVD”) appear alternately in the display
window.
• Do not press and hold LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 2.
3 Press and hold CLEAR using a ballpoint pen
or similar object and then press the button
you want to clear for about 3 seconds.
“C;OK” appears in the display window if clearing
was successful. Once “C;OK” appears in the display
window on the remote control, release the ballpoint
pen or similar object used to press CLEAR to exit the
clearing mode. The remote control returns to the
learning mode.
y
• If you continuously want to clear another function, repeat
step 4.
• If you continuously want to clear another function for
another component, press SELECT k / n to select the
input area, then repeat step 4.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
4 Press LEARN again to exit.
• “C;NG” appears in the display window on the remote control if
clearing was unsuccessful. In this case, start over from step 2.
• “ERROR” appears in the display window if you press more than
one button simultaneously.
Notes
V
-
AUX/DOCK
DTV
DVR/VCR 2
VCR 1
DVD
CBL/SAT
MD/TAPE
CD-R
PHONO
TUNER CD
MULTI CH IN
NET/USB
TV
SOURCE
AMP
TV
SOURCE
AMP
(U.S.A. model)
or
LEARN
Notes
CLEAR
LEARN
RENAME
MODE PTY SEEK
START
(U.S.A. model)