Filter
Top Products
ADVANCED SOUND CONFIGURATIONS
84 En
■ Selecting decoders for 2-channel
sources (surround decode mode)
Use this feature to play back sources with selected
decoders. You can play back 2-channel sources on multi-
channels.
1 Set the operation mode selector to AMP and
then press SUR. DECODE on the remote
control to select the surround decode mode.
2 Press SELECT on the remote control
repeatedly to select the desired decoder.
You can select from the following modes depending
on the type of source you are playing and your
personal preference.
y
• You can select the desired decoder by pressing SELECT
and then press l / h repeatedly on the remote control.
• You can select the desired decoder and adjust the decoder
parameter settings by using GUI screen. See page 88 for
details.
■ Decoder descriptions
ADVANCED SOUND CONFIGURATIONS
Selecting decoders
6
SUR. DECODE
TV
SOURCE
AMP
7
SELECT
SUR. DECODE PRO LOGIC
Dolby Pro Logic processing for any sources.
SUR. DECODE
PLIIx Movie
PL II Movie
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for movie sources. The Pro Logic IIx decoder is not available when “Surround
Back” is set to “None” (see page 106).
SUR. DECODE
PLIIx Music
PL II Music
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources. The Pro Logic IIx decoder is not available when “Surround
Back” is set to “None” (see page 106).
Panorama Dimension Center Width
Center WidthDimension
PLIIMusic
PLIIxMusic
SUR. DECODE
Panorama
6
SUR.DECODE
Dolby Pro Logic IIx (or Dolby Pro Logic II) processing for music sources. The Pro Logic IIx decoder is not
available when “Surround Back” is set to “None” (see page 106).
Available sound field parameters (see page 89)
Program description
Remote control
button
Name of the
decoder
(Decoder Type)
Category of the
program
6
SUR.DECODE
6
SUR.DECODE
6
SUR.DECODE