99 En
GRAPHIC USER INTERFACE (GUI) SCREEN
ADVANCED
OPERATION
4 Press n to select “EDIT” and press ENTER to
access the edit window.
The parameter selected in “PARAM” is highlighted.
• Press l / h to adjust the parameter.
• Press k / n to adjust the “Gain”.
• Press ENTER to exit the edit window.
y
• When you select “Band” in step 3, you can use this menu
as a graphic equalizer.
• The “Band #1” and “Band #2” can adjust the frequencies
below of 198.4 Hz.
• When you select “Subwoofer” in step 1 and “Band” in
step 3, you can adjust “Band #1” and “Band #2” only.
• For more information on the parametric equalizer, see
page 98.
5 Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all “Parametric EQ” parameter settings
for the selected speaker, select “RESET” and press ENTER.
6 Select “EXIT” and press ENTER to exit the
settings window.
■ Tone Control (Tone control)
Use this feature to adjust the balance of bass and treble
output to your speakers or headphones.
Choices: Control, Bass, Treble, Audio Bypass
Tone Control is not effective when:
– PURE DIRECT (see page 52) is selected.
– MULTI CH INPUT is selected as the input source.
Control (Tone control)
Choices: Speakers, Headphones
• Select “Speakers” to adjust the bass/treble balance of
your speakers.
• Select “Headphones” to adjust the bass/treble balance
of your headphones.
y
“Speaker” and “Headphone” adjustments are stored
independently. The adjustments for “Speaker” affects the
front left/right, center, presence left/right speaker channels
and Subwoofer channel.
Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: 125Hz, 350Hz, 500Hz
Control range: –6.0 dB to +6.0 dB
Initial setting: 0.0 dB
Treble (Treble control)
Use this feature to adjust high-frequencies output to your
speakers or headphones.
Choices: 2.5kHz, 3.5kHz, 8.0kHz
Control range: –6.0 dB to +6.0 dB
Initial setting: 0.0 dB
Note
Front L
Q
Freq.
Gain
Band
1.000
125.0Hz
0.0dB
#1
Front R
Center
Test Tone
Headphones
Speakers
Bass
Treble
Control
Bass
Treble
Control
Speaker
Freq : 350Hz
Gain : 0.0dB
+6
+0
-6
Audio Bypass
Auto Bypass
Bass
Treble
Control
Speaker
Freq : 3.5kHz
Gain : 0.0dB
+6
+0
-6