Filter
Top Products
120 En
REMOTE CONTROL FEATURES
*1
This button is operational only when the original remote control supplied with the component has a POWER button.
*2
These buttons operate your VCR only when you set the appropriate remote control code for VCR 1 (see page 120).
*3
These buttons always control your TV regardless of the operation mode selector position.
*4
Press and hold to search backward or forward.
*5
Simple remote mode (see page 75).
*6
Menu browse mode only (see page 75).
*7
Press and hold to store your favorite Internet Radio stations with bookmarks (see page 80).
*8
These buttons are not operational when the Internet Radio is selected as the sub input source of NET/USB.
*9
Press 1-8 to assign or recall the preset items (see page 81).
■ Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons.
Press SELECT k / n repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window on the remote control.
■ Controlling optional components
(Option mode)
“OPTN” is an optional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the option mode, press SELECT n
repeatedly until “OPTN” appears in the display
window on the remote control.
You cannot set a remote control code for the optional area. See
page 122 to program buttons operated within this component
control area.
You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to “LIST OF REMOTE CONTROL
CODES” at the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote control code default settings
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is preset as listed above.
In this case, try setting another YAMAHA remote control code.
Notes
Note
SELECT
SELECT
Setting remote control codes
Input area
Library
(component
category)
Manufacturer
Default
code
XM TUNER YAMAHA 2604
NET/USB TUNER YAMAHA 2607
PHONO TV – –
TUNER TUNER YAMAHA 2602
CD CD YAMAHA 2300
MULTI CH
INPUT
DVD YAMAHA 2100
V-AUX/
DOCK
TUNER YAMAHA 2606
CBL/SAT CABLE – –
MD/TAPE MD YAMAHA 2500
CD-R CD-R YAMAHA 2400
DTV TV – –
VCR 1 VCR – –
DVR/VCR2 DVR YAMAHA 2807
DVD DVD YAMAHA 2100
Note