Filter
Top Products
79
English
APPENDIX
7
DISPLAY MESSAGES
Reading
This unit reads the format of the CD, CD-R, or CD-RW disc loaded
on the disc tray. Approximately 10 to 20 seconds may be required
to complete this automatic adjustment. However, this time length
may change according to the type of the CD, CD-R, or CD-RW disc
that has been loaded.
Standby
This message is displayed for several seconds after REC has been
pressed to record on a CD-R or CD-RW disc.
Timer Standby
This message is displayed after the timer recording setting has been
completed, or displayed for approximate five seconds before the
timer recording starts.
Track No.Full
One disc can contain up to 99 tracks. Recording is attempted on the
disc that has reached the maximum number.
Unavailable
The CD-R disc whose recordable time is other than 74 minutes or
79 minutes or the CD-R disc which does not support 4x writing, or
the CD-RW disc has been loaded when copying in the Audio
Master Quality Recording mode.
Unrecordable
In recording or copying onto a CD-R or CD-RW disc, the disc
cannot be used for recording or copying. Or in recording or copying
onto the HDD, no space is available.
Wait
This message flashes while this unit is writing information to the
PMA (Program Memory Area) after a is pressed in recording onto
a CD-R or CD-RW disc, or flashes while processing the data on the
HDD or detecting the loaded HDD when this unit is turned on.
108_HD1500(E)76-85.p65 3/20/05, 12:4479