Filter
Top Products
59
English
EDITING
5
6. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the new track number.
7. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the new track number.
Press CLEAR to cancel the confirmed selection.
8. Press COMPLETE.
The selected track is renumbered.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Memo
• If the selected new track number is already in use, the tracks
following this renumbered track will be automatically up-
numbered by one. However, if there is any unused track number,
only the tracks up to that number will be up-numbered.
• The original number of the track that has been renumbered will be
available for future use.
Track Adjust
You can change the beginning of the track forward or backward.
1. If “Track Adjust” is selected (P.58), the following
screen appears.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
2. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be adjusted.
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
The number of the track to be adjusted flashes.
Press CLEAR to cancel the confirmed selection.
4. Select the track to be adjusted by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
The confirmed track will be played.
The following message appears in the display.
EDITING TRACKS
Memo
If there is no track before the track that is selected and
confirmed, “No Previous” appears on the display, and this unit
returns to step 4. (If the edit menu is selected during playback,
the unit cancels the edit operation.)
6. Rotate the MULTI JOG knob (press +/– on the remote
control) to adjust the time length (displacement).
The time length can be adjusted by “minute: second: frame”.
(Frame is the unit used for values smaller than 1 second. 75
frames make 1 second.) The unit to be set is flashing. Move the
flash to the unit to be adjusted by pressing t/e or r/y
(E or R on the remote control).
If you stop rotating the MULTI JOG knob, this unit searches
for the temporarily changed beginning point of the track
according to the time length setting made, and starts repeated
playback from the new beginning point to the end of the disc.
Press CLEAR to cancel the adjustment.
7. Press COMPLETE.
The new track beginning point is set.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Memo
• If the adjusted track includes a part that cannot be copied digitally
before adjusting, the adjusted track itself cannot be copied
digitally either.
•When the emphasis status of the track to be adjusted is different
from that of the previous track, the emphasis status of the track to
be adjusted takes precedence over the previous track.
Disc that contains the track to be adjusted
Track to be adjusted
Adjust 001 2?
GROUP
L
R
dB –30 –10 –6 –2 0
The time length to be adjusted
012 + 01000
TIME
Playing time of the track
Before “Track Adjust”
After “Track Adjust” (Track 2 is displaced forward)
12
12
106_HD1500(E)58-70.p65 3/18/05, 15:4659