Filter
Top Products
36
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
Setting a condition for synchronized
recording
This unit automatically detects track intervals when recording is
made in track-synchronized recording mode, multi-synchronized
recording mode, or all-synchronized recording mode. You can set
the condition for detecting track intervals. Setting items are as
follows.
1. Press MENU while this unit is in the stop mode.
Menu item selection appears on the display.
2. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select “Synchro Setup”.
3. Press the MULTI JOG knob (ENTER on the remote
control).
Setting item selection appears on the display.
4. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to select a setting item.
OPT TH Level
Sets the signal level that judges the signals input through the
DIGITAL IN (OPTICAL) jack as “no signal”.
Initial setting: –50dB, Control range: –90 to –20dB
COAX TH Level
Sets the signal level that judges the signals input through the
DIGITAL IN (COAXIAL) jack as “no signal”.
Initial setting: –50dB, Control range: –90 to –20dB
ANLG TH Level
Sets the signal level that judges the signals input through the
ANALOG LINE IN (REC) jacks as “no signal”.
Initial setting: –40dB, Control range: –60 to –20dB
ER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
MULTI JOG MENU
0
MODE
ENTER
MENU
COMPLETE
TRACK NO.
WRITE
HDD
CDR
CLEAR
10
ENTER
MENU
+, –
H, G
Synchro Setup
L
R
dB –30 –10 –6 –2 0
Int. Time
Sets the length of silence (“no signal”) that judges track intervals.
When the set amount of silence continues, this unit judges it as a
track interval and places a track marker.
Initial setting: 2.0 seconds, Control range: 0.5 to 5.0 seconds
End Duration
Sets the length of silence (“no signal”) that judges the end of
playback when recording in the all-synchronized recording mode.
When the set amount of silence continues, recording will be
stopped.
Initial setting: 12.0 seconds, Control range: 2.0 to 60.0 seconds
Memo
• If you set a TH (threshold) level, a signal less than the specified
TH level is not input through the jack (considered as “no signal”).
• Settings for “Int. Time” and “End Duration” apply to each input
jack.
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the setting item.
If “OPT TH Level”, “COAX TH Level” or “ANLG TH Level”
is confirmed, follow the “When OPT TH Level, COAX TH
Level, or ANLG TH Level is selected” procedure below.
If “Int. Time” or “End Duration” is confirmed, follow the
“When Int. Time or End Duration is selected” procedure below.
(When OPT TH Level, COAX TH Level, or ANLG TH Level
is selected)
6. Rotate the MULTI JOG knob (press +/–, H or G on the
remote control) to adjust the level.
Level can be set by 1dB step.
Example: To set “ANLG TH Level”
7. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the level.
Setting item selection appears on the display.
(When Int. Time or End Duration is selected)
6. Rotate the MULTI JOG knob (+/–, H or G on the
remote control) to set an interval.
“Int. Time” can be set by 0.5-second steps, and “End Duration”
can be set by 1.0-second steps.
Example: To set “Int.Time”
7. Press the MULTI JOG knob (ENTER on the remote
control) to set an interval.
Setting item selection appears on the display.
Press MENU twice to close the menu and return to the normal stop
mode.
ANLG TH -40dB
LEVEL
L
R
dB –30 –10 –6 –2 0
Time 2.0sec
TIME
L
R
dB –30 –10 –6 –2 0
103_HD1500(E)26-37.p65 5/23/05, 19:0736