Yamaha CDR-HD1500HDD CD Player User Manual


 
61
English
EDITING
5
EDITING TRACKS
7. Press MULTI JOG knob (ENTER on the remote
control) to confirm the beginning point of the partial
erase.
The passage between the temporary ending point of the partial
erase (the point that is 10 seconds after the beginning point)
and the point that is 5 seconds after the temporary ending point
is repeatedly played.
Press CLEAR to cancel the confirmed selection.
8. Rotate the MULTI JOG knob (press +/– on the remote
control) to select the ending point of the partial
erase.
The ending point of the partial erase can be set by “minute:
second: frame”. The unit to be set is flashing. Move the flash to
the unit to be set by pressing t /e or r/y (E or R
on the remote control).
If you stop rotating the MULTI JOG knob, this unit searches
for the ending point according to the setting made, and starts
repeated playback of the passage between the ending point and
the point that is 5 seconds after the ending point.
9. Press MULTI JOG knob (ENTER on the remote
control) to confirm the ending point of the partial
erase.
The passage between the point that is 5 seconds before the
beginning point and the point that is 5 seconds after the ending
point of the partial erase is repeatedly played.
The following message appears on the display.
Notes
•The sound may be interrupted at the joint but it will be played
properly after the partial erase is completed.
The minimum length of a track is four seconds. It is not
possible to create a track shorter than four seconds by erasing
partially.
Ending point of the partial erase
020 B 02000
TIME
Playing time of the track
Prt.Er. 005
L
R
dB –30 –10 –6 –2 0
Pt.Fix 006
L
R
dB –30 –10 –6 –2 0
1 2
3
Track
Track
: Part to be erased
1 Repeated passage when setting the beginning point
2 Repeated passage when setting the ending point
3 Repeated passage after confirming the ending point
To change the ending point, press CLEAR once to return to
step 8.
To change the beginning point, press CLEAR twice to return to
step 6.
10.
Press COMPLETE.
The selected part is erased.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
106_HD1500(E)58-70.p65 3/18/05, 15:4661