Teac AG-15D Home Theater System User Manual


 
ENGLISH
OSD (On-Screen Display) 3
98
Surround Mode
Select one of the surround modes using the up/down
buttons, and press the OSD button to go back to the main
menu.
Channel Level Trim
Select a channel using the UP/DOWN buttons, and press the
LEFT/RIGHT buttons to change the level.
Press the OSD button to go back to the main menu.
<
A channel which is set to “NONE” in the speaker setup
menu cannot be selected.
How to store the setting in REF.1 or REF.2
1.After changing the speaker’s level, press the ENTER button.
“1” blinks on the screen.
2.Press the LEFT or RIGHT button to select “REF.1” or
“REF.2”.
3.Press the ENTER button.
4.Press the OSD button to go back to the main menu.
How to call the stored setting
1.Select USER, REF.1 or REF2 using the up/down buttons.
2.Press the LEFT or RIGHT button to select “REF.1” or
“REF.2”.
3.Press the OSD button to go back to the main menu.
Auto OSD
Press the ENTER button to select on or off.
When “AUTO OSD” is set to ON, messages corresponding
to each operation will appear on the screen. If you feel them
disturbing your movie enjoyment, set to OFF.
<
The messages will disappear in several seconds.
F
E
D
SURROUND MODE
DOLBY PLIIx MOVIE
DOLBY PLIIx MUSIC
DOLBY PRO LOGIC
DOLBY VS REF
DOLBY VS WIDE
OSD:BACK
5b
:SELECT
b
CH LEVEL TRIM
REF. 1
FL
------- -------
C
------- -------
FR
------- -------
SR
------- -------
BR
------- -------
5b
:MOVE
gt
:CHANGE
OSD:BACK ENTER:MEMO
b
MAIN MENU
SPEAKER SETUP
FUNCTION SELECT
SURROUND MODE
CH LEVEL SETUP
AUTO OSD : ON
5b
:MOVE
OSD:END ENTER:SEL.
F
E
D