ENGLISH
42
Speaker Configuration 2
1 2 54
3
5
4
3
2
1
Speaker Setup
< When no action is taken for 8 seconds, the Speaker Setup
mode will be cancelled.
Press the POWER switch.
The unit enters standby mode, and the STANDBY indicator
lights.
Press the STANDBY/ON switch to turn the unit on.
The STANDBY indicator goes off.
Press the SPEAKER SETUP button.
“SUB-W Y” or “SUB-W N” appears on the display.
Each time the SPEAKER SETUP button is pressed, the mode is
changed as follows:
sub-woofer setting
speaker size setting (Front)
speaker size setting (Center)
speaker size setting (Surround)
speaker size setting (Surround Back)
distance (Front Left)
distance (Front Right)
distance (Center)
distance (Surround Left)
distance (Surround Right)
distance (Surround Back Left)
distance (Surround Back Right)
Crossover Frequency
<
The SPEAKER SETUP button will not work when the SPEAKER
button is set to off. In that case, press the SPEAKER button to
turn the speakers on and then press the SPEAKER SETUP
button.
<
The SPEAKER SETUP button will not work when EXTERNAL IN
is selected. In that case, press the EXTERNAL IN button to turn
it off and then press the SPEAKER SETUP button.
Press the SELECT buttons to change the setting.
For details of each setting, see page 44 to 52.
Repeat step and to set other configurations.
When all the configurations has been finished, press the
MEMORY button (or the ENTER button of the remote
control unit) to save the changes and exit the Speaker
Setup mode.
Be sure to press the MEMORY button within 8 seconds, or
the changes will be cancelled.
5
43
4
3
2
1