ENGLISH
DOLBY PRO LOGIC IIx MUSIC parameters
76
You can adjust the parameters for DOLBY PRO LOGIC IIx MUSIC.
Select DOLBY PRO LOGIC IIx MUSIC mode by pressing
the DSP button.
Select the parameter to be changed by pressing the
PARAMETER button.
Each time the PARAMETER button is pressed, the parameter is
changed as follows:
Within 8 seconds, press the SELECT button to change
the value.
PANO (panorama):
This mode extends the front stereo image to include the
surround speakers for an exciting wraparound effect with
side wall imaging. Select “ON” or “OFF”.
The default setting is “OFF”.
C-WID (center width control):
This adjusts the center image so it may be heard only from
the center speaker, only from the left/right speakers as a
phantom image, or from all three front speakers to varying
degrees.
The adjustable range is from 0 to 7. The default setting is
“0”.
DIMEN (dimension control):
This adjusts the sound-field either towards the front or
towards the rear. The adjustable range is from –4 to +2. The
default setting is “–1”.
Repeat step and to adjust other parameters.
When all the configurations have been finished, leave the unit
for 8 seconds to exit.
32
3
PANO C-WID DIMEN
2
1
213
3
2
1