Tascam MD-CD1 CD Player User Manual


 
1 – Introduction—Environmental considerations
8
TASCAM MD-CD1
Owner’s Manual
•Keep discs away from direct sunlight, and places of
high heat and humidity. If left in such places, warp-
ing could result.
Do not afx any labels or stickers to the label side
of the disc. Do not write on the disc with a ball-
point pen.
Please do not insert discs that have adhesive
remaining from tape or stickers that have been
removed. If they are inserted into the player, they
could stick to the internal mechanism, requiring
removal by a technician.
Handling of MiniDiscs
The disc itself is mounted inside a cartridge. Should
the cartridge become soiled or warped, playback or
recording may not be possible. To ensure proper
operation, please observe the following.
After use, always return the MiniDisc to its case.
Do not open the shutter or touch the disc inside. If
the shutter is forced open, the mechanism could
easily break.
•Keep discs out of direct sunlight and places of high
heat and humidity.
Dirt and grime on the cartridge surface should be
wiped away with a dry cloth.
Loose or raised labels may jam the playback mech-
anism.
Do not stick labels over one another on the car-
tridge.
About the User Table of Contents (U-TOC)
The U-TOC on recordable MiniDiscs makes it easy
to edit the tracks on the disc. It contains track infor-
mation (such as titles and starting and ending
addresses), and by rewriting this data, the playback
order can be freely changed.
Cartridge
Shutter
Music Data
U-TOC
2ReMD-CD1.fm 8ページ 2004年11月5日 金曜日 午前7時35分