Filter
Top Products
11 – Title input—Track title input
46
TASCAM MD-CD1
Owner’s Manual
Track title input
Method 1
With this method, the tracks for title input are
selected first.
1
Put the deck in playback or playback
standby mode on the track you wish to add a
title. During recording, you may also input a
title for the current track being recorded.
2
Select the “TITLE INPUT?” option on the
TITLE sub-menu of the MD menu, and press
the ENTER key on the front panel, or the
ENT/YES key on the remote control.
The title of the track in play will be shown on
the character display, Title Edit mode is
entered, and the cursor flashes.
NOTE
If there is no track title, only the cursor will flash and
nothing will be displayed.
3
Following the title input guidelines above,
input the title, and press the MD MENU key
on the front panel or the MENU key on the
remote control to confirm.
Method 2
With this method, the Title Input mode is selected
first.
1
During stop mode, select the “TITLE
INPUT?” option on the TITLE sub-menu on
the MD menu.
“Title> Disc” is displayed.
2
Select the track for title input using the
MULTI JOG dial on the front panel, or the
MENU -/+ key on the remote control, then
press the ENTER key on the front panel or
the ENT/YES key on the remote control.
For example, select “Title> 003” to choose
track 3.
When a selection is made, the current track
title is shown on the character display, Title
Edit mode is entered, and the cursor flashes.
NOTE
If there is no track title, only the cursor will flash and
nothing will be displayed.
3
Following the title input guidelines above,
input the title, and press the MD MENU key
on the front panel or the MENU key on the
remote control to confirm.
Group title input
1
During stop mode, select the “TITLE GRP?”
option on the TITLE sub-menu on the MD
menu.
“Title Grp> **” is displayed, with ** repre-
senting the group number.
2
Press the ENTER key on the front panel or
the ENT/YES key on the remote control.
The current group title is shown on the char-
acter display, Title Edit mode is entered, and
the cursor flashes. The group number flashes
on the track number display.
3
Following the guidelines for title input meth-
ods above, input the title, and press the MD
MENU key on the front panel or the MENU
key on the remote control to confirm.
2ReMD-CD1.fm 46 ページ ２００４年１１月５日 金曜日 午前７時３５分